3M™ Window Film Test Reports

Abrasion Resistance

Safety S70 ASTM D-1044 (PDF, 100 KB) – 3M Abrasion Resistance test report for Safety S70 (SH7CLARL)
AG_SWF ASTM D-1044 (PDF, 72.5 KB) – 3rd Party Test Report for Abrasion Resistance of Anti-Graffiti and Security Window Films. Also contains data for Peel and Puncture Strength.
Safety Ext ASTM D-1044 (PDF, 101.6 KB) – 3rd Party Test Report for Abrasion Resistance of Safety Exterior S40. Data can be applied to Safety Exterior S20 and S70 which use the same hardcoat.
Safety Series ASTM D1044 (PDF, 90.8 KB) – 3rd Party Test Report for Abrasion Resistance of Safety S70 and S80.
Ultra S600_Ultra S800 ASTM D-1044 (PDF, 61.4 KB) – 3rd Party Test Report for Abrasion Resistance of Ultra S600 and Ultra S800.

Blast Mitigation

2014 Blast Test Scotchshield Ultra Prestige and Night Vision (PDF, 3.1 MB) – Report # E1272.01-119-12. Ultra Prestige and Ultra Night Vision with IPA and IPP on single and double pane annealed and tempered glass.
2014 Blast Test Report Safety Neutral S35 (PDF, 5.1 MB) – Report # E1272.02-119-12. Safety Neutral S35 with IPA and IPP on single and double pane annealed and tempered glass.
2014 Blast Test Report Safety Silver S20 (PDF, 5.2 MB) – Report # E1272.03-119-12. Safety Silver S20 with IPA and IPP on single and double pane annealed and tempered glass.
2014 Blast Report Scotchshield Ultra S600_IPA_single pane glass (PDF, 3.08 MB) – Report # D8962.02-119-12. Scotchshield Ultra S600 with IPA on 1/4″ annealed and 1/4″ tempered single pane glass.
2014 Blast Report Scotchshield Ultra S600_IPP_single pane glass (PDF, 3.22 MB) – Report # D8962.01-119-12. Scotchshield Ultra S600 with IPP on 1/4″ annealed and 1/4″ tempered single pane glass.
2014 Blast Report Ultra S800_IPP_IPA_single pane glass (PDF, 4.60 MB) – Report # D8962.03-119-12. Scotchshield Ultra S800 with IPP and IPA on 1/4″ annealed and 1/4″ tempered single pane glass.
2014 Blast Test Report Ultra S600_IPA_IPP_double pane glass (PDF, 4.58 MB) – Report # D8934.01-119-12. Scotchshield Ultra S600 with IPP and IPA on double pane annealed glass (1/4″ AG_1/2″ airspace_1/4″AG).
2014 Blast Test Report Ultra S800_IPA_IPP_double pane glass (PDF, 4.60 MB) – Report # D8934.02-119-12. Scotchshield Ultra S800 with IPP and IPA on double pane annealed glass (1/4″ AG_1/2″ airspace_1/4″AG).
2014 Blast Test Report Ultra S800 / S600 daylight (PDF, 5.4 MB) – Report # E1298.01-801-12. Daylight blast testing (no attachment) of Scotchshield Ultra S800 and S600 on single & double pane and annealed & tempered glass units.

Break and Entry

EN 356 Ultra S800_P1A (PDF, 974.7 KB) – 3rd Party EN 356 test report for Ultra S800, level P1A rating
EN 356_3M Ultra S800 x2 P3A (PDF, 213.5 KB) – 3rd Party EN 356 test report for Ultra S800 applied to both sides of the glass, level P3A rating
SH14 _UL 972_Dec30-2009 (PDF, 280 KB) – 3rd Party UL 972 test report for Safety S140 (SH14CLARL)
SH14_ULC S332_Aug27-2002 (PDF, 180 KB) – 3rd Party ULC S332 test report for Safety S140 (SH14CLARL)
Ultra S600 Safety S140 EN 356 Aug 10-2009 (PDF, 1.2 MB) – 3rd Party EN 356 test report for Safety S140 (SH14CLARL) and Ultra S600. Test with film applied at attack face and with film applied on both sides of glass.
ATI Break and Entry Safety S140 April 2013 (PDF, 500 KB) – 3rd Party test report of Safety S140 resistance to intrusion by attacker with firearm.
ATI Break and Entry 6 mil Microlayered April 2013 (PDF, 452 KB) – 3rd Party test report of 6 mil tear resistant film resistance to intrusion by attacker with firearm.
ATI Break and Entry Full Report All Test April 2013 (PDF, 807 KB) – 3rd Party test report of 3M films resistance to attack by various methods including firearms, bat, and hammer.
Scotchshield Ultra S800 Break and Entry 2014 (PDF, 698.2 KB) – 3rd Party Break and Entry Test Report showing results with Ultra S800.
Scotchshield Ultra S600 Break and Entry 2014 (PDF, 619.3 KB) – 3rd Party Break and Entry Test Report showing results with Ultra S600.
Scotchshield Ultra Break and Entry 2014 All Tests (PDF, 3.33 MB) – 3rd Party Break and Entry Test Report showing results from all testing.

Chemical Resistance

3M test report on film resistance to acid etching (PDF, 570 KB) – 3M test results on the following products: Ultra S400, Safety S40X, Safety S40, and Prestige 70 (HPWF 70)
PET Chemical Resistance (PDF, 340 KB) – Guide for General Chemical Resistance Properties of polyester. (Source: PlasticsEurope)

Corrosion

Prestige Corrosion Video – Ever wondered how Prestige stacks up against the competition? Watch this video to find out how Prestige outlasts the competition.

EMI Shielding

EMI Shielding 3M Window Films (PDF, 50 KB) – Document pulled from the window film manual that shows the signal interference of different films.

Film Mechanical Properties

Scotchshield Ultra Prestige S70 Graves Tear Strength report (PDF, 185.35 KB) – 3M Internal Test report on Graves Area Tear Strength (ASTM D1004) – Ultra PR S70.
Scotchshield Ultra Prestige S50 Graves Tear Strength report (PDF, 185.49 KB) – 3M Internal Test report on Graves Area Tear Strength (ASTM D1004) – Ultra PR S50.
Scotchshield Ultra Night Vision S25 Graves Tear Strength report (PDF, 184.44 KB) – 3M Internal Test report on Graves Area Tear Strength (ASTM D1004) – Ultra NV S25.
Ultra Prestige S70 Puncture-Propagation-Tear Strength report (PDF, 82.59 KB) – 3M Internal Test report on PPT Tear Strength (ASTM D2589) – Ultra PR S70.
Scotchshield Ultra Night Vision S25 Tensile Strength report (PDF, 106.38 KB) – 3M Internal Test report on film tensile/elongation properties of Ultra Night Vision S25.
Scotchshield Ultra Prestige S70 Tensile Strength report (PDF, 99.84 KB) – 3M Internal Test report on film tensile/elongation properties of Ultra Prestige S70.
Scotchshield Ultra Prestige S50 Tensile Strength report (PDF, 101.13 KB) – 3M Internal Test report on film tensile/elongation properties of Ultra Prestige S50.
Safety Exterior Series Tensile Strength / Elongation (PDF, 90.80 KB) – 3rd Party test report (2014) — Safety Exterior Series (S20, S40 and S70) Tensile and Break Strength, Elongation. Tested per ASTM D882 on finished product (with coatings, no liner). Also contains data for Abrasion Resistance, Peel and Puncture Strength.
PPT Tear Resistance Ultra S600 (PDF, 43.08 KB) – 3M Internal Test report on PPT Tear Strength (ASTM D2589) – Ultra S600.
PPT Tear Resistance Ultra S800 (PDF, 42.88 KB) – 3M Internal Test report on PPT Tear Strength (ASTM D2589) – Ultra S800.
Ultra Prestige S50 Puncture-Propagation-Tear Strength report (PDF, 83.01 KB) – 3M Internal Test report on PPT Tear Strength (ASTM D2589) – Ultra PR S50.
Safety S40 Exterior Tensile Strength report (PDF, 60.59 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Safety S40 Exterior.
Safety S40 Tensile Strength report (PDF, 45.67 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Safety S40.
Safety S80 Tensile Strength report (PDF, 40.13 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Safety S80.
Safety S140 Tensile Strength report (PDF, 39.91 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Safety S140.
Scotchshield Ultra S600 Tensile Strength report (PDF, 61.47 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Ultra S600.
Scotchshield Ultra S800 Tensile Strength report (PDF, 39.56 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Ultra S800.
Safety Silver S20 Tensile Strength report (PDF, 44.91 KB) – 3M Internal Test report for Tensile Strength (ASTM D882) – Silver S20.
3M Scotchshield Ultra S600 Graves Tear Strength (PDF, 71.3 KB) – 3rd Party test report for Graves Tear Strength (2014) – with coatings
3M Scotchshield Ultra S800 Graves Tear Strength (PDF, 71.3 KB) – 3rd Party test report for Graves Tear Strength (2014) – with coatings
Base film Ultra S600_Ultra S800 Graves Tear without coatings (PDF, 85.1 KB) – 3rd Party test report for Graves Tear Strength (2014) — Ultra base film WITHOUT COATINGS
Base film Ultra S600_Ultra S800 Tensile without coatings (PDF, 85.1 KB) – 3rd Party test report for Tensile Strength (2014) — Ultra base film WITHOUT COATINGS
3M Scotchshield Ultra S600 Tensile Strength / Elongation (PDF, 61.4 KB) – 3rd Party test report (2014) — Scotchshield Ultra S600 Tensile and Break Strength, Elongation. Tested per ASTM D882 on finished product (with coatings, no liner)
3M Scotchshield Ultra S800 Tensile Strength / Elongation (PDF, 62 KB) – 3rd Party test report (2014) — Scotchshield Ultra S800 Tensile and Break Strength, Elongation. Tested per ASTM D882 on finished product (with coatings, no liner)
Safety Series Puncture Strength (PDF, 101.6 KB) – Safety Series (S70, S80 and S140) 3rd Party test report – Puncture Strength (ASTM D4830).
Safety S70 Exterior Puncture Strength (PDF, 90.8 KB) – 3rd Party test report – Puncture Strength (ASTM D4830).
Anti-Graffiti and Security Window Film Puncture Strength (PDF, 72.5 KB) – Anti-Graffiti and Security Window Films 3rd Party test report – Puncture Strength (ASTM D4830). Also contains data for Abrasion Resistance and Peel Strength.
3M Scotchshield Ultra S600 Puncture Strength (PDF, 60.3 KB) – Scotchshield Ultra S600 3rd Party test report – Puncture Strength (ASTM D4830).
3M Scotchshield Ultra S800 Puncture Strength (PDF, 60.9 KB) – Scotchshield Ultra S800 3rd Party test report – Puncture Strength (ASTM D4830).
Safety S70 Exterior 3M Tensile Properties Report (PDF, 38 KB) – 3M Test report on film tensile/elongation properties of Safety S70 Exterior.
Safety S70 3M Tensile Properties report (PDF, 70 KB) – 3M Test report on film tensile/elongation properties of Safety S70.

Flammability

Analysis of Combustion Gases
- Safety S70 (SH7CLARL) Boeing Standard 7239 1-23-2009 (PDF, 170 KB) – 3rd Party test report showing primary byproducts of combustion
- Safety S40 (SH4CLARL) NFX 70-100 3-28-2000 (PDF, 90 KB) – 3rd Party test report showing primary byproducts of combustion
ASTM E84-Surface Burn
- Ultra Prestige S50 ASTM E84_FSI 5_SDI 25_2015 CLASS A (PDF, 1.86 MB) – 3rd Party Flammability test report for Ultra Prestige S50
- Dinoc ASTM E84 8-2-2006 (PDF, 600 KB) – 3rd Party Flammability test report for Di-Noc film
- Dinoc ASTM E84 8-2-2006 (PDF, 600 KB) – 3rd Party Flammability test report for Di-Noc film
- FASARA ASTM E84 12-11-2006 (PDF, 1.9 MB) – 3rd Party Flammability test report for Fasara film
- Night Vision 25 ASTM E84 7-7-2005 (PDF, 1.9 MB) – 3rd Party Flammability test report for NV25
- Safety S140 (SH14CLARL) ASTM E84 6-28-2005 (PDF, 2 MB) – 3rd Party Flammability test report for Safety S140
- Safety S80 (SH8CLARL) ASTM E84 6-27-2005 (PDF, 1.97 MB) – 3rd Party Flammability test report for Safety S80
- Safety S80 (SH4CLARL) ASTM E84 2-27-1987 (PDF, 2 MB) – 3rd Party Flammability test report for Safety S80
- ASTM E84 Safety S40_FSI 5_SDI 15_2014 CLASS A (PDF, 683.3 KB) – 3rd Party Flammability test report for Safety S40
- ASTM E84 Safety S40X_FSI 25_SDI 145_2014 CLASS A (PDF, 257 KB) – 3rd Party Flammability test report for Safety Exterior S40
- ASTM E84 AG4_FSI 5_SDI 10_2014_ CLASS A (PDF, 715.1 KB) – 3rd Party Flammability test report for Anti-Graffiti 4
- ASTM E84 AG6_FSI 20_SDI 115_2014 CLASS A (PDF, 257 KB) – 3rd Party Flammability test report for Anti-Graffiti 6
- ASTM E84 Safety S20X_FSI 0_SDI 5_2014 CLASS A (PDF, 724.3 KB) – 3rd Party Flammability test report for Safety Exterior S20
- ASTM E84 Safety S70X_FSI 20_SDI 155_2014 CLASS A (PDF, 256.9 KB) – 3rd Party Flammability test report for Safety Exterior S70
- ASTM E84 Safety S70_FSI 5_SDI 15_2014 CLASS A (PDF, 732.7 KB) – 3rd Party Flammability test report for Safety S70
- ASTM E84 Scotchshield Ultra 600_FSI 0_SDI 15_2014 CLASS A (PDF, 720.4 KB) – 3rd Party Flammability test report for Scotchshield Ultra S600
- ASTM E84 Scotchshield Ultra 800_FSI 5_SDI 25_2014 CLASS A (PDF, 650.0 KB) – 3rd Party Flammability test report for Scotchshield Ultra S800
- ASTM E84 Safety Silver S20_FSI 5_SDI 50_2014 CLASS A (PDF, 526.7 KB) – 3rd Party Flammability test report for Safety Silver S20
- ASTM E84 Safety Neutral S35_FSI 5_SDI 50_2014 CLASS A (PDF, 546.3 KB) – 3rd Party Flammability test report for Safety Neutral S35
European Flammability BS 476 (Flame Spread) and BS 6853 (Smoke Density)
- 3M™ Thinsulate Window Film Climate Control 75 Fire Classification Testing. Third party testing (PDF, 527 KB)
- Opinion of Compliance – SH4CLARL Class 0 surface BS476 (PDF, 549 KB) – 3rd party opinion letter stating that Safety S40 (SH4CLARL) meets requirements for Class 0 surface
- Safety S40 (SH4CLARL) BS 476 3-21-1995 (Test 2) (PDF, 2.4 MB) – 3rd Party test report in 3M World Wide Test Report format showing Flame Spread (BS 476) of Safety S40 (SH4CLARL) on 6 mm wired glass
- Safety S40 (SH4CLARL) BS 476 3-21-1995 (PDF, 1.7 MB) – 3rd Party test report in 3M World Wide Test Report format showing Flame Spread (BS 476) of Safety S40 (SH4CLARL) on 6 mm wired glass
- Safety S40 (SH4CLARL) BS 476 3-28-2000 (PDF, 200 KB) – 3rd Party test report showing Flame Spread (BS 476) of Safety S40 (SH4CLARL) on 6 mm float glass
- Safety S40 (SH4CLARL) BS 476 4-28-2000 (PDF, 200 KB) – 3rd Party test report showing Flame Spread (BS 476) of Safety S40 (SH4CLARL) on 6 mm float glass
- Safety S40 (SH4CLARL) BS 6853 3-28-2000 (PDF, 200 KB) – 3rd Party test report showing Smoke Density (BS 6853) of Safety S40 (SH4CLARL) on 6 mm float glass
Other Standards
- Safety S40 (SH4CLARL) NF F16-101 NF P92-507 10-10-2007 (PDF, 184.99 KB) – 3rd Party test report showing Smoke Density of Safety S40 (SH4CLARL)
- Safety S70 (SH7CLARL) NF F16-101 NF P92-507 11-20-2007 (PDF, 230 KB) – 3rd Party test report showing flammability properties of Safety S70 (SH7CLARL) according to French test standards for transit applications
- Safety S70 (SH7CLARL) ASTM E162-06 1-23-2009 (PDF, 370 KB) – 3rd Party test report showing surface Flammability of Safety S70 (SH7CLARL) using a Radiant Energy Heat Source
- Safety S70 (SH7CLARL) ASTM E662 1-23-2009 (PDF, 170 KB) – 3rd Party test report showing Smoke Density of Safety S70 (SH7CLARL)

Peel Strength

3M Scotchshield Ultra S600 Peel Strength (Adhesion to Glass) (PDF, 61 KB) – Scotchshield Ultra S600 3rd Party test report – Peel Strength (ASTM D3330 Method A)
3M Scotchshield Ultra S800 Peel Strength (Adhesion to Glass) (PDF, 61.5 KB) – Scotchshield Ultra S800 3rd Party test report – Peel Strength (ASTM D3330 Method A)
Safety Series Peel Strength (Adhesion to Glass) (PDF, 101.6 KB) – S40, S70, S80, and S140 3rd Party test report – Peel Strength (ASTM D3330 Method A).
Safety Exterior Series Peel Strength (Adhesion to Glass) (PDF, 90.8 KB) – Safety Exterior Series S20, S40, and S70 3rd Party test report – Peel Strength (ASTM D3330 Method A).
Anti-Graffiti and Security Window Film Peel Strength (PDF, 72.5 KB) – Anti-Graffiti and Security Window Films 3rd Party test report – Peel Strength (ASTM D3330 Method A). Also contains data for Abrasion Resistance and Puncture Strength.

Safety Glazing Human Impact

CPSC 1201 Consumer Products Safety

CPSC 1201 Silver S20 Cat II 0.25_2015 (PDF, 68.40 KB) – 3rd Party test report showing Safety Silver S20 meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ glass.
CPSC 1201 Scotchshield Ultra Prestige Cat II 0.125 and 0.25_2015 (PDF, 86.26 KB) – 3rd Party test report showing Scotchshield Ultra Prestige meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ and 1/8″ glass.
CPSC 1201 Safety S70 Exterior Cat 1_0.25 (PDF, 205.66 KB) – 3rd Party test report showing Safety S70 Exterior meeting CPSC 1201 Category 1 impact requirements (150 ft-lbs) on 1/4″ glass.
Safety S70 CPSC 1201_Cat II (0.125) and Cat I (0.125 & 0.25) (PDF, 670 KB) – 3rd Party test report showing Safety S70 (SH7CLARL) meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/8″ glass and Category 1 (150 ft-lbs) requirements on 1/4″ glass
Safety S40 Exterior CPSC Cat I (0.25) 6-13-13 (PDF, 207 KB) – 3rd Party test report showing Safety S40 Exterior meeting CPSC 1201 Category 2 impact requirements on 1/4″ and glass
CPSC 1201 Safety S80 Cat II 0.25_2014 (PDF, 68.6 KB) – 3rd Party test report showing Safety S80 meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ glass. Also states compliance with ANSI Z97.1 and Canada impact standards.
CPSC 1201 Scotchshield Ultra S600 Cat II 0.125 and 0.25_2014 (PDF, 62.1 KB) – 3rd Party test report showing Scotchshield Ultra S600 meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ and 1/8″ glass. Also states compliance with ANSI Z97.1 and Canada impact standards.
CPSC 1201 Scotchshield Ultra S800 Cat II 0.125 and 0.25_2014 (PDF, 75.7 KB) – 3rd Party test report showing Scotchshield Ultra S800 meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ and 1/8″ glass. Also states compliance with ANSI Z97.1 and Canada impact standards.
Ultra Prestige S50 CPSC Cat II (0.25) 2015 (PDF, 86.2 KB) – 3rd Party test report showing Ultra Prestige S50 meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ glass
Safety Neutral S35 CPSC Cat II (0.25) 2015 (PDF, 87.2 KB) – 3rd Party test report showing Safety Neutral S35 meeting CPSC 1201 Category 2 impact requirements (400 ft-lbs) on 1/4″ glass
Ultra Night Vision S25 ANSI Z97.1 Cat II (0.25) 2015 (PDF, 86.8 KB) – 3rd Party test report showing Ultra Night Vision S25 meeting CPSC 1201, Category 2 impact requirements (400 ft-lbs) on 1/4″ glass

ANSI Z97.1

ANSI Z97.1 Silver S20 Class A 0.25_2015 (PDF, 68.40 KB) – 3rd Party test report showing Safety Silver S20 meeting ANSI Z97.1 impact requirements (400 ft-lbs) on 1/4″ glass.
ANSI Z97.1 Safety S70 Exterior Class B 0.25 (PDF, 205.66 KB) – 3rd Party test report showing Safety S70 Exterior meeting ANSI Z97.1 impact requirements (150 ft-lbs) on 1/4″ glass.
Ultra Prestige S50 ANSI Z97.1 Class A (0.25) 2015 (PDF, 86.26 KB) – 3rd Party test report showing Ultra Night Vision S25 meeting ANSI Z97.1, Class A (Unlimited) impact requirements (400 ft-lbs) on 1/4″ glass.
Safety S40 Exterior ANSI Z97.1 Class B (0.25) 6-13-13 (PDF, 207 KB) – 3rd Party test report showing Safety S40 Exterior meeting ANSI Z97.1 Class B (unlimited) impact requirements on 1/4″ and glass
ANSI Z97.1 Safety S80 Class A 0.25_2014 (PDF, 68.6 KB) – 3rd Party test report showing Safety S80 meeting ANSI Z97.1 Class A impact requirements (400 ft-lbs) on 1/4″ glass. Also states compliance with 16 CFR 1201 and Canada impact standards.
ANSI Z97.1 Scotchshield Ultra S600 Class A 0.125 and 0.25_2014 (PDF, 62.1 KB) – 3rd Party test report showing Scotchshield Ultra S600 meeting ANSI Z97.1 Class A impact requirements (400 ft-lbs) on 1/4″ and 1/8″ glass. Also states compliance with 16 CFR 1201 and Canada impact standards.
ANSI Z97.1 Scotchshield Ultra S800 Cat II 0.125 and 0.25_2014 (PDF, 75.7 KB) – 3rd Party test report showing Scotchshield Ultra S800 meeting ANSI Z97.1 Class A impact requirements (400 ft-lbs) on 1/4″ and 1/8″ glass. Also states compliance with 16 CFR 1201 and Canada impact standards.
Safety Neutral S35 ANSI Z97.1 Class A (0.25) 2015 (PDF, 87.2 KB) – 3rd Party test report showing Safety Neutral S35 meeting ANSI Z97.1, Class A (Unlimted) impact requirements (400 ft-lbs) on 1/4″ glass
Ultra Night Vision S25 ANSI Z97.1 Class A (0.25) 2015 (PDF, 86.8 KB) – 3rd Party test report showing Ultra Night Vision S25 meeting ANSI Z97.1, Class A (Unlimted) impact requirements (400 ft-lbs) on 1/4″ glass
AGED Impact Ultra S600 ANSI Z97.1 Class A (0.125) 2015 (PDF, 74 KB) – 3rd Party test report showing Ultra S600 meeting ANSI Z97.1, Class A (Unlimted) AGED impact requirements (400 ft-lbs) on 1/8″ glass
AGED Impact Ultra S800 ANSI Z97.1 Class A (0.125) 2015 (PDF, 74 KB) – 3rd Party test report showing Ultra S800 meeting ANSI Z97.1, Class A (Unlimted) AGED impact requirements (400 ft-lbs) on 1/8″ glass

EN 12600

Safety S40 Exterior 4mm 2B2 film side 3B3 glass side (PDF, 100.85 KB) – 3rd Party test report showing Safety S40 Exteror meeting 2B2 impact rating on film side and 3B3 rating on glass side of 4 mm float glass.
Safety S40 Exterior 6mm 2B2 (PDF, 102.38 KB) – 3rd Party test report showing Safety S40 Exteror meeting 2B2 impact rating on 6 mm float glass.
Safety S70 Exterior 6mm 2B2 (PDF, 103.34 KB) – 3rd Party test report showing Safety S70 Exteror meeting 2B2 impact rating on 6 mm glass.
Safety S70 Exterior 4mm 2B2 (PDF, 102.46 KB) – 3rd Party test report showing Safety S70 Exteror meeting 2B2 impact rating on 4 mm glass.
Ultra NVS25_EN12600_1B1 film_2B2 glass (PDF, 296.73 KB) – 3rd Party test report showing Ultra Night Vision S25 meeting 1B1 impact rating on filmed side and 2B2 rating on glass side (6 mm glass).
Ultra PRS70_EN12600_1B1 film_2B2 glass (PDF, 297 KB) – 3rd Party test report showing Ultra Prestige S50 meeting 1B1 impact rating on filmed side and 2B2 rating on glass side (6 mm glass).
3M Thinsulate CC75_3B3_both sides (PDF, 249.2 KB) – 3rd Party test report showing Thinsulate CC75 meeting 3B3 impact rating on 4mm glass.
Ultra 600 on 4mm_1B1 filmed side_092014 (PDF, 78.15 KB) – 3rd Party test report showing Ultra S600 meeting 1B1 impact rating (film side) on 4mm glass.
Ultra 600 on 4mm_2B2_glass side_092014 (PDF, 77 KB) – 3rd Party test report showing Ultra S600 meeting 2B2 impact rating (glass side) on 4mm glass.
Ultra 600 on 6mm_1B1_filmed side_092014 (PDF, 78.2 KB) – 3rd Party test report showing Ultra S600 meeting 1B1 impact rating (film side) on 6mm glass.
Ultra 600 on 6mm_2B2_glass side_092014 (PDF, 91.6 KB) – 3rd Party test report showing Ultra S600 meeting 2B2 impact rating (glass side) on 6mm glass.
Ultra 800 on 4mm_1B1_film side_092014 (PDF, 78 KB) – 3rd Party test report showing Ultra S800 meeting 1B1 impact rating (film side) on 4mm glass.
Ultra 800 on 4mm_1B1_glass side_092014 (PDF, 78 KB) – 3rd Party test report showing Ultra S800 meeting 1B1 impact rating (glass side) on 4mm glass.
Ultra 800 on 6mm_1B1_film side_092014 (PDF, 92.7 KB) – 3rd Party test report showing Ultra S800 meeting 1B1 impact rating (film side) on 6mm glass.
Ultra 800 on 6mm_1B1_glass side_092014 (PDF, 78 KB) – 3rd Party test report showing Ultra S800 meeting 1B1 impact rating (glass side) on 6mm glass.
Safety S40 (SH4CLARL) 3mm Float_3B3 (PDF, 210 KB) – 3rd Party test report showing Safety S40 meeting 3B3 impact rating (62 ft-lbs) on 3mm glass
Safety S40 (SH4CLARL) 6mm Georgian Wired Glass 3B3 (PDF, 230 KB) – 3rd Party test report showing Safety S40X meeting 3B3 impact rating (62 ft-lbs) on 6mm wired glass
Safety S40 (SH4CLARL) 6mm Float 2B2 (PDF, 150 KB) – Certificate from Glass and Glazing Federation stating that Safety S40 meets 2B2 impact rating (150 ft-lbs) on 6mm glass
Safety S40X (SH4CLARXL) 4mm Float 2B2 (PDF, 230 KB) – 3rd Party test report showing Safety S40X meeting 2B2 impact rating (150 ft-lbs) on 4mm glass
Safety S40X (SH4CLARXL) 6mm Float 2B2 (PDF, 230 KB) – 3rd Party test report showing Safety S40X meeting 2B2 impact rating (150 ft-lbs) on 6mm glass
Safety S70 (SH7CLARL) 8mm Float 2B2 (PDF, 230 KB) – 3rd Party test report showing Safety S70 meeting 2B2 impact rating (150 ft-lbs) on 8mm glass
Safety S70 (SH7CLARL) 4mm Float 1B1 (PDF, 150 KB) – Certificate from Glass and Glazing Federation stating that Safety S70 meets 1B1 impact rating (400 ft-lbs) on 4mm glass
Safety S70 (SH7CLARL) 6mm Float 2B2 (PDF, 250 KB) – 3rd Party test report showing Safety S70 meeting 2B2 impact rating (150 ft-lbs) on 6mm glass
Safety S80 (SH8CLARL) 4mm Float 1B1 (PDF, 260 KB) – 3rd Party test report showing Safety S80 meeting 1B1 impact rating (400 ft-lbs) on 4mm glass
Safety S80 (SH8CLARL) 6mm Float 1B1 (PDF, 260 KB) – 3rd Party test report showing Safety S80 meeting 1B1 impact rating (400 ft-lbs) on 6mm glass
Safety S80 (SH8CLARL) 8mm Float 1B1 (PDF, 260 KB) – 3rd Party test report showing Safety S80 meeting 1B1 impact rating (400 ft-lbs) on 8mm glass
Ultra S150 (SCLARL150) 4mm Float 3B3 (PDF, 150 KB) – Certificate from Glass and Glazing Federation stating that Ultra S150 meets 3B3 impact rating (62 ft-lbs) on 4mm glass
Ultra Silver S20 (S20SIAR400) 6mm Float 2B2 (PDF, 150 KB) – Certificate from Glass and Glazing Federation stating that Ultra Silver S20 meets 2B2 impact rating (150 ft-lbs) on 6mm glass
Ultra S600 4mm Float 1B1 (PDF, 150 KB) – Certificate from Glass and Glazing Federation stating that Ultra S600 meets 1B1 impact rating (400 ft-lbs) on 4mm glass
Ultra S600 6mm Float 1B1 (PDF, 150 KB) – Certificate from Glass and Glazing Federation stating that Ultra S600 meets 1B1 impact rating (400 ft-lbs) on 6mm glass
Ultra S600 8mm Float 3B3 (PDF, 220 KB) – 3rd Party test report showing Ultra S600 meeting 3B3 impact rating (62 ft-lbs) on 8mm glass

Sound Attenuation

S140 Glassbreak Sensor (PDF, 20 KB) – 3rd Party test report showing that application of Safety S140 does not interfere with the ability of Glassbreak sensors to detect sound
Ultra600 Glassbreak Sensors (PDF, 20 KB) – 3rd Party test report showing that application of Safety S600 does not interfere with the ability of Glassbreak sensors to detect sound

UV Protection

All Films_Fading Picture (PDF, 690 KB) – Picture showing fading of a fabric after accelerated weathering
All Films_Skin Cancer study (PDF, 20 KB) – Study completed by the skin cancer foundation discussing UV and its relation to skin cancer
US Skin Cancer prevalence (PDF, 220 KB) – Study completed by the skin cancer foundation showing the prevalence of skin cancer on the left side of people due to UV radiation through the driver’s side window

VOC Content

All Films VOC LEED (PDF, 20 KB) – letter used to answer question on Volatile Organic Compounds (VOCs) especially in reference to LEED projects
2014 3M Window Film VOC Report (PDF, 1 MB)
2014 3M MAS Certified Green Certificate of Compliance (PDF, 38 KB)

Windstorm

Ultra Night Vision S25_IPA_Level A_70 psf_6mmTTG_2016 (PDF, 442 KB) – 3rd Party test report showing Ultra Night Vision S25 with IPA met Missile Level A impact and Pressure cycling at +/- 70 psf (~165 mph wind speed). Tested on 1/4″ tempered glass.
Ultra Prestige_IPA_Level A_70 psf_6mmTTG_2015 (PDF, 459 KB) – 3rd Party test report showing Ultra Prestige with IPA met Missile Level A impact and Pressure cycling at +/- 70 psf (~165 mph wind speed). Tested on 1/4″ tempered glass.
Safety Silver S20 IPA Missile A 60 psf 1/4″ tempered (PDF, 512.5 KB) – 3rd Party test report showing Safety Silver S20 with IPA met Missile Level A impact and Pressure cycling at +/- 60 psf (~153 mph wind speed). Tested on 1/4″ tempered glass.
Ultra S800 IPA Missile A 75 psf 1/4″ tempered (PDF, 507.5 KB) – 3rd Party test report showing Ultra S800 with IPA met Missile Level A impact and Pressure cycling at +/- 75 psf (~171 mph wind speed). Tested on 1/4″ tempered glass.
Ultra S800 IPA Missile C 75 psf 1/4″ tempered (PDF, 498.8 KB) – 3rd Party test report showing Ultra S800 with IPA met Missile Level C impact and Pressure cycling at +/- 75 psf (~171 mph wind speed). Tested on 1/4″ tempered glass.
Safety S140 (SH14CLARL) DOW 995 Level C 4.7mm TTG June 2007 PASS (PDF, 170 KB) – 3rd Party test report showing that Safety S140 with Dow Corning 995 met Missile Level C impact and Pressure cycling at +/- 50 psf. Tested on 1/4″ tempered glass.
Scotchshield Ultra S600 IPA Missile A 80 psf 3/16″ tempered (PDF, 485.8 KB) – 3rd Party test report showing that Scotchshield Ultra S600 with IPA met Missile Level A impact and Pressure cycling at +/- 80 psf (~177 mph wind speed). Tested on 3/16″ tempered glass.
Safety Neutral S35 IPA Missile C 60 psf 1/4″ tempered (PDF, 448.6 KB) – 3rd Party test report showing Safety Neutral S35 with IPA met Missile Level C impact and Pressure cycling at +/- 60 psf (~153 mph wind speed). Tested on 1/4″ tempered glass.

Why Choose Window Film Depot?

Since 1992, Window Film Depot has been working hard to build a truly unique national business to serve its commercial and retail customers. Family owned and operated, we’ve been named a National Dealer of the Year by 3M and recognized by Window Film Magazine as the #1 window film dealer in the US for 2014, 2015, 2016 and 2018.

When projects call for a professional window film installation company, trust Window Film Depot for commercial graphics installation, sun control films, safety and security films, and 3M security attachment systems. Whether your project is local, regional or national, Window Film Depot can rapidly deploy installation teams to the biggest buildings or multiple retail locations. We guarantee to perform to the exacting standards of true professionals.

What Our Customers Say

To expand on our earlier conversation. Krissy has been a life saver for us! You have a great one helping us on this and I am attempting to move more business your way because of her excellent communication and execution. I have also sent her name into JLL as a great contact for other JLL projects as well. I am extremely impressed with Window Film Depot.

Rob Mote, Project Manager, Jones Lang LaSalle

Test Reports